Stihl FS 70 C-E Petrol Brushcutter

Name: Stihl FS 70 C-E Petrol Brushcutter
Price: 472.19 EUR
Availability: InStock

~~€624.67~~ €472.19

Extremely robust 0.9 kW petrol brushcutter with bike handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.

FREE SHIPPING

Add to Wishlist

Description
Brand

Stihl FS 70 C-E Petrol Brushcutter

Technical data

Displacement cm³	27.2
Power output kW/bhp	0.9/1.2
Weight kg ¹⁾	5.4
Sound pressure level dB(A) ²⁾	94.0
Sound power level dB(A) ²⁾	107.0
Vibration levels left/right m/s² ³⁾	7.0/5.5
Vibration levels left/right with metal blade m/s² ³⁾	6.6/6.6
Overall length m ⁴⁾	1.7
Standard cutting tool	AutoCut 25-2. GSB 230-2
Tank volume l	0.34

1) without cutting tool and deflector
2) Power factor according to DIR2006/42/EC=2.5(dB(A))
3) (K) factor according to Dir. 2006/42/EC = 2m/s²
4) without tool

Standard equipment

STIHL 2-MIX-Engine

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Basic harness

For use with loop handle machines.
Multi-function control handle

Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Simplified starting system

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Goggles

It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.